RUTM09 - 4G LTE Router
Description
The RUTM09 is a wireless 4G LTE router developed for high-cellular-speed applications. It comes with Cat 6 and dual SIM capabilities, enabling the device to support speeds of up to 300 Mbps and functions like carrier aggregation and failover. Additionally, the RUTM09 comes with four Gigabit RJ45 ports and includes GNSS, enabling GPS tracking for precise location detection. These features make the RUTM09 an exceptional choice for ensuring non-interruptible network connectivity for mobile applications or those requiring tracking.
Standard package*
- Router RUTM09
- 18 W PSU
- 2x Mobile antennas (swivel, SMA male)
- 1x GNSS antenna (adhesive, SMA male, 3 m cable)
- Ethernet cable (1.5 m)
- SIM Adapter kit
- QSG (Quick Start Guide)
- Packaging box
Features
Mobile
| Feature | Details |
|---|---|
| 4G LTE | Cat 6 up to 300 DL / 50 UL Mbps; 3G up to 42 DL / 5.76 UL Mbps |
| 3GPP Release | Release 12 |
| SIM Switch | 2 SIM cards, auto-switch based on: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection |
| Status | IMSI, ICCID, operator, operator state, data connection state, network type, CA indicator, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC |
| SMS | SMS status, configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS auto-reply, SMPP |
| USSD | Supports sending and reading Unstructured Supplementary Service Data messages |
| Black/White List | Operator black/white list (by country or separate operators) |
| Multiple PDN | Use of different PDNs for multiple network access and services |
| Band Management | Band lock, used band status display |
| SIM Idle Protection | Idle SIM remains unused until switched to; no data usage on the inactive SIM |
| SIM PIN Code Management | Enables setting, changing, or disabling the SIM card's PIN |
| APN | Auto APN |
| Bridge | Direct connection (bridge) between mobile ISP and device on LAN |
| Passthrough | Router assigns its mobile WAN IP address to another device on LAN |
Ethernet
| Feature | Details |
|---|---|
| WAN | 1 x WAN port, 10/100/1000 Mbps; compliant with IEEE 802.3, IEEE 802.3u, and 802.3az standards; supports auto MDI/MDIX crossover |
| LAN | 3 x LAN ports, 10/100/1000 Mbps; compliant with IEEE 802.3, IEEE 802.3u, and 802.3az standards; supports auto MDI/MDIX crossover |
Network
| Feature | Details |
|---|---|
| Routing | Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy-based routing |
| Network Protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On LAN (WOL), VXLAN |
| VoIP Passthrough Support | H.323 and SIP-ALG protocol NAT helpers, allowing proper routing of VoIP packets |
| Connection Monitoring | Ping Reboot, Wget Reboot, Periodic Reboot, LCP, and ICMP for link inspection |
| Firewall | Port forward, traffic rules, custom rules, TTL target customization |
| Firewall Status Page | View all Firewall statistics, rules, and rule counters |
| Ports Management | View device ports, enable/disable each port, toggle auto-configuration, adjust transmission speed |
| Network Topology | Visual representation of your network and connected devices |
| DHCP | Static and dynamic IP allocation, DHCP relay, DHCP server configuration, static leases (MAC with wildcards) |
| QoS / Smart Queue Management | Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e |
| DDNS | Supports >25 service providers, with manual configuration for others |
| DNS Over HTTPS | DNS over HTTPS proxy for secure DNS resolution |
| Network Backup | Mobile, VRRP, and wired options for automatic failover |
| Load Balancing | Balance Internet traffic over multiple WAN connections |
| Hotspot | Captive portal, internal/external Radius server, MAC authentication, SMS authorization, SSO, landing page, walled garden, user management, customizable themes |
| SSHFS | Mount remote file system via SSH protocol |
| VRF Support | Initial virtual routing and forwarding (VRF) support |
| Traffic Management | Real-time monitoring, wireless signal charts, traffic usage history |
Security
| Feature | Details |
|---|---|
| 802.1x | Port-based network access control client |
| Authentication | Pre-shared key, digital certificates, X.509 certificates, TACACS+, internal & external RADIUS user authentication, IP & login attempts block, time-based login blocking, built-in random password generator |
| Firewall | Preconfigured firewall rules via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64 |
| Attack Prevention | DDOS prevention (SYN flood, SSH attack, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
| VLAN | Port and tag-based VLAN separation |
| Mobile Quota Control | Mobile data limit with customizable period, start time, warning limit, and phone number settings |
| Web Filter | Blacklist to block unwanted websites; whitelist to specify allowed sites |
| Access Control | Flexible control for SSH, Web interface, CLI, and Telnet access |
| SSL Certificate Generation | Supports Let's Encrypt and SCEP certificate generation methods |
VPN
| Feature | Details |
|---|---|
| OpenVPN | Multiple clients and a server can run simultaneously; 27 encryption methods |
| OpenVPN Encryption | Includes DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, AES-128-GCM, AES-256-GCM, etc. |
| IPsec | XFRM, IKEv1, IKEv2; 14 encryption methods including 3DES, AES128, AES256, AES128GCM8, AES256GCM16 |
| GRE | GRE tunnel and GRE tunnel over IPsec support |
| PPTP, L2TP | Simultaneous Client/Server instances; L2TPv3 and L2TP over IPsec support |
| Stunnel | Adds TLS encryption functionality to existing clients/servers without altering the program code |
| DMVPN | Scalable IPsec VPNs with Phase 2, Phase 3, and Dual Hub support |
| SSTP | SSTP client instance support |
| ZeroTier | ZeroTier VPN client support |
| WireGuard | WireGuard VPN client and server support |
| Tinc | Offers encryption, authentication, and compression in tunnels; Client and server support |
| Tailscale | Provides speed, stability, and simplicity with encrypted point-to-point connections using WireGuard protocol |
OPC UA
| Feature | Details |
|---|---|
| Supported Modes | Client, Server |
| Supported Connections | TCP |
MODBUS
| Feature | Details |
|---|---|
| Supported Modes | Server, Client |
| Supported Connection Types | TCP, USB |
| Custom Registers | MODBUS TCP custom register block requests that read/write to a file inside the router, extending MODBUS TCP Client functionality |
| Supported Data Formats | 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII |
Data to Server
| Feature | Details |
|---|---|
| Protocol | HTTP(S), MQTT, Azure MQTT |
| Data to Server | Extract parameters from multiple sources and protocols, and send them to a single server |
| Custom LUA Scripting | Enables custom scripts to utilize the router's Data to Server feature |
MQTT Gateway
| Feature | Details |
|---|---|
| Modbus MQTT Gateway | Allows sending commands and receiving data from MODBUS Server through an MQTT broker |
DNP3
| Feature | Details |
|---|---|
| Supported Modes | Station, Outstation |
| Supported Connections | TCP, USB |
DLMS
| Feature | Details |
|---|---|
| DLMS Support | DLMS - standard protocol for utility meter data exchange |
| Supported Modes | Client |
| Supported Connections | TCP, USB |
COSEM
| Feature | Details |
|---|---|
| COSEM | Allows scanning of meter COSEM objects for automatic detection and configuration |
API
| Feature | Details |
|---|---|
| Teltonika Networks Web API (Beta) Support | Expand your device's possibilities using configurable API endpoints to retrieve or change data. For more information, refer to the documentation |
Monitoring & Management
| Feature | Details |
|---|---|
| WEB UI | HTTP/HTTPS access for status, configuration, firmware updates, CLI, troubleshooting, event log servers, firmware update notifications, system log, kernel log, internet status |
| FOTA | Firmware update from server with automatic notification |
| SSH | SSH (v1, v2) |
| SMS | SMS status, configuration, send/read SMS via HTTP POST/GET |
| Call | Reboot, status, mobile data on/off, output on/off, answer/hang-up with a timer |
| Receive email alerts for various service status changes | |
| TR-069 | Supports OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem |
| MQTT | MQTT Broker, MQTT Publisher |
| SNMP | SNMP (v1, v2, v3), SNMP Trap, Brute force protection |
| JSON-RPC | Management API over HTTP/HTTPS |
| RMS | Teltonika Remote Management System (RMS) |
IoT Platforms
| Feature | Details |
|---|---|
| ThingWorx | Monitors WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type |
| Cumulocity - Cloud of Things | Monitors Device Model, Revision, Serial Number, WAN Type/IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength. Also supports reboot and firmware upgrade actions |
| Azure IoT Hub | Can be configured with Data to Server to send parameters to the cloud. Supports Direct method for executing RutOS API calls, and Plug and Play integration with Device Provisioning Service for zero-touch device provisioning |
| AWS IoT Core | Utility for interacting with AWS cloud platform, with Jobs Support for calling device API using AWS Jobs functionality |
System Characteristics
| Feature | Details |
|---|---|
| CPU | MediaTek, Dual-core, 880 MHz, MIPS1004Kc |
| RAM | 256 MB, DDR3 |
| FLASH Storage | 16 MB serial NOR flash, 256 MB serial NAND flash |
Firmware / Configuration
| Feature | Details |
|---|---|
| WEB UI | Update firmware from file, check firmware on server, configuration profiles, configuration backup |
| FOTA | Update firmware |
| RMS | Update firmware/configuration for multiple devices at once |
| Keep Settings | Update firmware without losing current configuration |
| Factory Settings Reset | Full reset restores all system settings, including IP address, PIN, and user data to default configuration |
Firmware Customization
| Feature | Details |
|---|---|
| Operating System | RutOS (OpenWrt-based Linux OS) |
| Supported Languages | Busybox shell, Lua, C, C++ |
| Development Tools | SDK package with build environment provided |
| GPL Customization | Create custom, branded firmware and web applications by modifying colours, logos, and other elements |
| Package Manager | Service used to install additional software on the device |
Location Tracking
| Feature | Details |
|---|---|
| GNSS | GPS, GLONASS, BeiDou, Galileo, and QZSS |
| Coordinates | GNSS coordinates via WebUI, SMS, TAVL, RMS |
| NMEA | NMEA 0183 |
| Server Software | Supported server software: TAVL, RMS |
| Geofencing | Configurable multiple geofence zones |
USB
| Feature | Details |
|---|---|
| Data Rate | USB 2.0 |
| Applications | Samba share, USB-to-serial |
| External Devices | Connect external HDD, flash drive, additional modem, printer, USB-serial adapter |
| Storage Formats | FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4 |
Input / Output
| Feature | Details |
|---|---|
| Input | 1 x Configurable digital input, 0 - 6 V detected as logic low, 8 - 50 V detected as logic high |
| Output | 1 x Configurable digital output, Open collector output, max output 50 V, 300 mA |
| Events | Email, RMS, SMS |
| I/O Juggler | Allows setting certain I/O conditions to initiate events |
Power
| Feature | Details |
|---|---|
| Connector | 4-pin industrial DC power socket |
| Input Voltage Range | 9 – 50 VDC, reverse polarity protection, surge protection >51 VDC 10us max |
| PoE (Passive) | Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at, and 802.3bt standards, Mode B, 9 - 50 VDC |
| Power Consumption | Idle: < 2.65 W, Max: < 9.82 W |
Physical Interfaces
| Feature | Details |
|---|---|
| Ethernet | 4 x RJ45 ports, 10/100/1000 Mbps |
| I/O’s | 1 x Digital Input, 1 x Digital Output on 4-pin power connector |
| Status LEDs | 3 x WAN type LEDs, 3 x Mobile connection type, 5 x Mobile connection strength, 8 x LAN status, 1 x Power |
| SIM | 2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders |
| Power | 1 x 4-pin power connector |
| Antennas | 2 x SMA for Mobile, 1 x SMA for GNSS |
| USB | 1 x USB A port for external devices |
| Reset | Reboot/User default reset/Factory reset button |
| Other | 1 x Grounding screw |
Physical Specification
| Feature | Details |
|---|---|
| Casing Material | Anodized aluminum housing and panels |
| Dimensions (W x H x D) | 115 x 44.2 x 95.1 mm |
| Weight | 457 g |
| Mounting Options | DIN rail, wall mount, flat surface (all require additional kit) |
Operating Environment
| Feature | Details |
|---|---|
| Operating Temperature | -40 °C to 75 °C |
| Operating Humidity | 10% to 90% non-condensing |
| Ingress Protection Rating | IP30 |
Regulatory & Type Approvals
| Feature | Details |
|---|---|
| Regulatory | CE, UKCA, RCM, CB |
EMC Emissions & Immunity
| Feature | Details |
|---|---|
| Standards | EN 55032:2015 + A11:2020 + A1:2020, EN 55035:2017 + A11:2020, EN 61000-3-3:2013 + A1:2019 + A2:2021, EN IEC 61000-3-2:2019 + A1:2021 |
| ESD | EN 61000-4-2: 2009 |
| Radiated Immunity | EN IEC 61000-4-3: 2020 |
| EFT | EN 61000-4-4: 2012 |
| Surge Immunity (AC Mains Power Port) | EN 61000-4-5:2014+A1:2017 |
| Surge Immunity (AC Power Line) | EN 61000-4-5:2014+A1:2017 |
| CS | EN 61000-4-6: 2014 |
| DIP | EN IEC 61000-4-11: 2020 |
RF Standards
| Feature | Details |
|---|---|
| Standards | EN 301 908-1 V13.1.1, EN 301 908-2 V13.1.1, EN 301 908-13 V13.1.1, EN 303 413 V1.2.1 |
Safety Standards
| Feature | Details |
|---|---|
| CE | EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020 |
| RCM | AS/NZS 62368.1:2022 |
| CB | IEC 62368-1:2018 |
Safety (Ordinary Locations)
| Feature | Details |
|---|---|
| Standards | CE: EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020 RCM: AS/NZS 62368.1:2022 CB: IEC62368-1:2018 |
Downloads
Manual & Documentation
RUTM09 FLYER (EN)
RUTM09 DATASHEET (EN)
Links
RUTM09 QUICK START GUIDE (EN)
FIRMWARE DOWNLOADS
RUTM09 USER MANUAL
CERTIFICATIONS & APPROVALS
PRODUCT CHANGE NOTIFICATIONS
SDK DOWNLOADS
GPL DOWNLOADS
RUTM09 3D MODELS
$135.88
Original: $452.95
-70%RUTM09 - 4G LTE Router—
$452.95
$135.88
Description
Description
The RUTM09 is a wireless 4G LTE router developed for high-cellular-speed applications. It comes with Cat 6 and dual SIM capabilities, enabling the device to support speeds of up to 300 Mbps and functions like carrier aggregation and failover. Additionally, the RUTM09 comes with four Gigabit RJ45 ports and includes GNSS, enabling GPS tracking for precise location detection. These features make the RUTM09 an exceptional choice for ensuring non-interruptible network connectivity for mobile applications or those requiring tracking.
Standard package*
- Router RUTM09
- 18 W PSU
- 2x Mobile antennas (swivel, SMA male)
- 1x GNSS antenna (adhesive, SMA male, 3 m cable)
- Ethernet cable (1.5 m)
- SIM Adapter kit
- QSG (Quick Start Guide)
- Packaging box
Features
Mobile
| Feature | Details |
|---|---|
| 4G LTE | Cat 6 up to 300 DL / 50 UL Mbps; 3G up to 42 DL / 5.76 UL Mbps |
| 3GPP Release | Release 12 |
| SIM Switch | 2 SIM cards, auto-switch based on: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection |
| Status | IMSI, ICCID, operator, operator state, data connection state, network type, CA indicator, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC |
| SMS | SMS status, configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS auto-reply, SMPP |
| USSD | Supports sending and reading Unstructured Supplementary Service Data messages |
| Black/White List | Operator black/white list (by country or separate operators) |
| Multiple PDN | Use of different PDNs for multiple network access and services |
| Band Management | Band lock, used band status display |
| SIM Idle Protection | Idle SIM remains unused until switched to; no data usage on the inactive SIM |
| SIM PIN Code Management | Enables setting, changing, or disabling the SIM card's PIN |
| APN | Auto APN |
| Bridge | Direct connection (bridge) between mobile ISP and device on LAN |
| Passthrough | Router assigns its mobile WAN IP address to another device on LAN |
Ethernet
| Feature | Details |
|---|---|
| WAN | 1 x WAN port, 10/100/1000 Mbps; compliant with IEEE 802.3, IEEE 802.3u, and 802.3az standards; supports auto MDI/MDIX crossover |
| LAN | 3 x LAN ports, 10/100/1000 Mbps; compliant with IEEE 802.3, IEEE 802.3u, and 802.3az standards; supports auto MDI/MDIX crossover |
Network
| Feature | Details |
|---|---|
| Routing | Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy-based routing |
| Network Protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On LAN (WOL), VXLAN |
| VoIP Passthrough Support | H.323 and SIP-ALG protocol NAT helpers, allowing proper routing of VoIP packets |
| Connection Monitoring | Ping Reboot, Wget Reboot, Periodic Reboot, LCP, and ICMP for link inspection |
| Firewall | Port forward, traffic rules, custom rules, TTL target customization |
| Firewall Status Page | View all Firewall statistics, rules, and rule counters |
| Ports Management | View device ports, enable/disable each port, toggle auto-configuration, adjust transmission speed |
| Network Topology | Visual representation of your network and connected devices |
| DHCP | Static and dynamic IP allocation, DHCP relay, DHCP server configuration, static leases (MAC with wildcards) |
| QoS / Smart Queue Management | Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e |
| DDNS | Supports >25 service providers, with manual configuration for others |
| DNS Over HTTPS | DNS over HTTPS proxy for secure DNS resolution |
| Network Backup | Mobile, VRRP, and wired options for automatic failover |
| Load Balancing | Balance Internet traffic over multiple WAN connections |
| Hotspot | Captive portal, internal/external Radius server, MAC authentication, SMS authorization, SSO, landing page, walled garden, user management, customizable themes |
| SSHFS | Mount remote file system via SSH protocol |
| VRF Support | Initial virtual routing and forwarding (VRF) support |
| Traffic Management | Real-time monitoring, wireless signal charts, traffic usage history |
Security
| Feature | Details |
|---|---|
| 802.1x | Port-based network access control client |
| Authentication | Pre-shared key, digital certificates, X.509 certificates, TACACS+, internal & external RADIUS user authentication, IP & login attempts block, time-based login blocking, built-in random password generator |
| Firewall | Preconfigured firewall rules via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64 |
| Attack Prevention | DDOS prevention (SYN flood, SSH attack, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
| VLAN | Port and tag-based VLAN separation |
| Mobile Quota Control | Mobile data limit with customizable period, start time, warning limit, and phone number settings |
| Web Filter | Blacklist to block unwanted websites; whitelist to specify allowed sites |
| Access Control | Flexible control for SSH, Web interface, CLI, and Telnet access |
| SSL Certificate Generation | Supports Let's Encrypt and SCEP certificate generation methods |
VPN
| Feature | Details |
|---|---|
| OpenVPN | Multiple clients and a server can run simultaneously; 27 encryption methods |
| OpenVPN Encryption | Includes DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, AES-128-GCM, AES-256-GCM, etc. |
| IPsec | XFRM, IKEv1, IKEv2; 14 encryption methods including 3DES, AES128, AES256, AES128GCM8, AES256GCM16 |
| GRE | GRE tunnel and GRE tunnel over IPsec support |
| PPTP, L2TP | Simultaneous Client/Server instances; L2TPv3 and L2TP over IPsec support |
| Stunnel | Adds TLS encryption functionality to existing clients/servers without altering the program code |
| DMVPN | Scalable IPsec VPNs with Phase 2, Phase 3, and Dual Hub support |
| SSTP | SSTP client instance support |
| ZeroTier | ZeroTier VPN client support |
| WireGuard | WireGuard VPN client and server support |
| Tinc | Offers encryption, authentication, and compression in tunnels; Client and server support |
| Tailscale | Provides speed, stability, and simplicity with encrypted point-to-point connections using WireGuard protocol |
OPC UA
| Feature | Details |
|---|---|
| Supported Modes | Client, Server |
| Supported Connections | TCP |
MODBUS
| Feature | Details |
|---|---|
| Supported Modes | Server, Client |
| Supported Connection Types | TCP, USB |
| Custom Registers | MODBUS TCP custom register block requests that read/write to a file inside the router, extending MODBUS TCP Client functionality |
| Supported Data Formats | 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII |
Data to Server
| Feature | Details |
|---|---|
| Protocol | HTTP(S), MQTT, Azure MQTT |
| Data to Server | Extract parameters from multiple sources and protocols, and send them to a single server |
| Custom LUA Scripting | Enables custom scripts to utilize the router's Data to Server feature |
MQTT Gateway
| Feature | Details |
|---|---|
| Modbus MQTT Gateway | Allows sending commands and receiving data from MODBUS Server through an MQTT broker |
DNP3
| Feature | Details |
|---|---|
| Supported Modes | Station, Outstation |
| Supported Connections | TCP, USB |
DLMS
| Feature | Details |
|---|---|
| DLMS Support | DLMS - standard protocol for utility meter data exchange |
| Supported Modes | Client |
| Supported Connections | TCP, USB |
COSEM
| Feature | Details |
|---|---|
| COSEM | Allows scanning of meter COSEM objects for automatic detection and configuration |
API
| Feature | Details |
|---|---|
| Teltonika Networks Web API (Beta) Support | Expand your device's possibilities using configurable API endpoints to retrieve or change data. For more information, refer to the documentation |
Monitoring & Management
| Feature | Details |
|---|---|
| WEB UI | HTTP/HTTPS access for status, configuration, firmware updates, CLI, troubleshooting, event log servers, firmware update notifications, system log, kernel log, internet status |
| FOTA | Firmware update from server with automatic notification |
| SSH | SSH (v1, v2) |
| SMS | SMS status, configuration, send/read SMS via HTTP POST/GET |
| Call | Reboot, status, mobile data on/off, output on/off, answer/hang-up with a timer |
| Receive email alerts for various service status changes | |
| TR-069 | Supports OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem |
| MQTT | MQTT Broker, MQTT Publisher |
| SNMP | SNMP (v1, v2, v3), SNMP Trap, Brute force protection |
| JSON-RPC | Management API over HTTP/HTTPS |
| RMS | Teltonika Remote Management System (RMS) |
IoT Platforms
| Feature | Details |
|---|---|
| ThingWorx | Monitors WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type |
| Cumulocity - Cloud of Things | Monitors Device Model, Revision, Serial Number, WAN Type/IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength. Also supports reboot and firmware upgrade actions |
| Azure IoT Hub | Can be configured with Data to Server to send parameters to the cloud. Supports Direct method for executing RutOS API calls, and Plug and Play integration with Device Provisioning Service for zero-touch device provisioning |
| AWS IoT Core | Utility for interacting with AWS cloud platform, with Jobs Support for calling device API using AWS Jobs functionality |
System Characteristics
| Feature | Details |
|---|---|
| CPU | MediaTek, Dual-core, 880 MHz, MIPS1004Kc |
| RAM | 256 MB, DDR3 |
| FLASH Storage | 16 MB serial NOR flash, 256 MB serial NAND flash |
Firmware / Configuration
| Feature | Details |
|---|---|
| WEB UI | Update firmware from file, check firmware on server, configuration profiles, configuration backup |
| FOTA | Update firmware |
| RMS | Update firmware/configuration for multiple devices at once |
| Keep Settings | Update firmware without losing current configuration |
| Factory Settings Reset | Full reset restores all system settings, including IP address, PIN, and user data to default configuration |
Firmware Customization
| Feature | Details |
|---|---|
| Operating System | RutOS (OpenWrt-based Linux OS) |
| Supported Languages | Busybox shell, Lua, C, C++ |
| Development Tools | SDK package with build environment provided |
| GPL Customization | Create custom, branded firmware and web applications by modifying colours, logos, and other elements |
| Package Manager | Service used to install additional software on the device |
Location Tracking
| Feature | Details |
|---|---|
| GNSS | GPS, GLONASS, BeiDou, Galileo, and QZSS |
| Coordinates | GNSS coordinates via WebUI, SMS, TAVL, RMS |
| NMEA | NMEA 0183 |
| Server Software | Supported server software: TAVL, RMS |
| Geofencing | Configurable multiple geofence zones |
USB
| Feature | Details |
|---|---|
| Data Rate | USB 2.0 |
| Applications | Samba share, USB-to-serial |
| External Devices | Connect external HDD, flash drive, additional modem, printer, USB-serial adapter |
| Storage Formats | FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4 |
Input / Output
| Feature | Details |
|---|---|
| Input | 1 x Configurable digital input, 0 - 6 V detected as logic low, 8 - 50 V detected as logic high |
| Output | 1 x Configurable digital output, Open collector output, max output 50 V, 300 mA |
| Events | Email, RMS, SMS |
| I/O Juggler | Allows setting certain I/O conditions to initiate events |
Power
| Feature | Details |
|---|---|
| Connector | 4-pin industrial DC power socket |
| Input Voltage Range | 9 – 50 VDC, reverse polarity protection, surge protection >51 VDC 10us max |
| PoE (Passive) | Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at, and 802.3bt standards, Mode B, 9 - 50 VDC |
| Power Consumption | Idle: < 2.65 W, Max: < 9.82 W |
Physical Interfaces
| Feature | Details |
|---|---|
| Ethernet | 4 x RJ45 ports, 10/100/1000 Mbps |
| I/O’s | 1 x Digital Input, 1 x Digital Output on 4-pin power connector |
| Status LEDs | 3 x WAN type LEDs, 3 x Mobile connection type, 5 x Mobile connection strength, 8 x LAN status, 1 x Power |
| SIM | 2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders |
| Power | 1 x 4-pin power connector |
| Antennas | 2 x SMA for Mobile, 1 x SMA for GNSS |
| USB | 1 x USB A port for external devices |
| Reset | Reboot/User default reset/Factory reset button |
| Other | 1 x Grounding screw |
Physical Specification
| Feature | Details |
|---|---|
| Casing Material | Anodized aluminum housing and panels |
| Dimensions (W x H x D) | 115 x 44.2 x 95.1 mm |
| Weight | 457 g |
| Mounting Options | DIN rail, wall mount, flat surface (all require additional kit) |
Operating Environment
| Feature | Details |
|---|---|
| Operating Temperature | -40 °C to 75 °C |
| Operating Humidity | 10% to 90% non-condensing |
| Ingress Protection Rating | IP30 |
Regulatory & Type Approvals
| Feature | Details |
|---|---|
| Regulatory | CE, UKCA, RCM, CB |
EMC Emissions & Immunity
| Feature | Details |
|---|---|
| Standards | EN 55032:2015 + A11:2020 + A1:2020, EN 55035:2017 + A11:2020, EN 61000-3-3:2013 + A1:2019 + A2:2021, EN IEC 61000-3-2:2019 + A1:2021 |
| ESD | EN 61000-4-2: 2009 |
| Radiated Immunity | EN IEC 61000-4-3: 2020 |
| EFT | EN 61000-4-4: 2012 |
| Surge Immunity (AC Mains Power Port) | EN 61000-4-5:2014+A1:2017 |
| Surge Immunity (AC Power Line) | EN 61000-4-5:2014+A1:2017 |
| CS | EN 61000-4-6: 2014 |
| DIP | EN IEC 61000-4-11: 2020 |
RF Standards
| Feature | Details |
|---|---|
| Standards | EN 301 908-1 V13.1.1, EN 301 908-2 V13.1.1, EN 301 908-13 V13.1.1, EN 303 413 V1.2.1 |
Safety Standards
| Feature | Details |
|---|---|
| CE | EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020 |
| RCM | AS/NZS 62368.1:2022 |
| CB | IEC 62368-1:2018 |
Safety (Ordinary Locations)
| Feature | Details |
|---|---|
| Standards | CE: EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020 RCM: AS/NZS 62368.1:2022 CB: IEC62368-1:2018 |
Downloads
Manual & Documentation
RUTM09 FLYER (EN)
RUTM09 DATASHEET (EN)
Links
RUTM09 QUICK START GUIDE (EN)
FIRMWARE DOWNLOADS
RUTM09 USER MANUAL
CERTIFICATIONS & APPROVALS
PRODUCT CHANGE NOTIFICATIONS
SDK DOWNLOADS
GPL DOWNLOADS
RUTM09 3D MODELS
