EMB1061 is an embedded BLE module by MXCHIP. It integrates a BLE4.2 single mode SOC, including ARM Cortex-M0 Core, BLE/2.4G Radio, 24KB RAM, 160KB Flash and rich peripherals. EMB1061 uses half-hole package which is easy for soldering.

Hardware diagram is shown below with three main parts:

32-bit Cortex-M0 Core
BLE 2.4GHz RF
Power management

With:

Up to 16MHz ARM Cortex-M0 MCU with 24KB RAM , 160KB FLASH, UART，I2C，SPI，ADC，Timer/PWM
RF part: support PCB antenna or IPEX connector
Power management: DC3.3V power supply, operating voltage range: 1.7V~3.6V

Features

Based on an ultra-low power BLE SOC

- ARM Cortex-M0 Core 32MHz
- 24KB RAM
- 160KB Flash

Operating Voltage: 1.7V～3.6V
Bluetooth Features

- Support Bluetooth 4.2 (BLE single mode)
- Max TX power: 8dBm
- Min RX sensitivity: -87dBm
- Support BLE Master/ Slave mode
- Support broadcasting, data encryption,and adaptive frequency hopping

Operating Temperature：-40℃ to +105℃
Antenna: PCB antenna or IPEX connector (Optional)

Application

Intelligent lighting
Smart Home Application
Wearables
Smart healthcare
Portable devices

EMB1061 pin

Operating Conditions

EMB1061 would be unstable when input voltage is less than the lowest rated voltage. Range of input voltage:

Symbol	Illustration	Condition	Details
Symbol	Illustration	Condition	Minimum	Typ	Maximum	Unit
VDD	Power Supply		1.7	3.3	3.6	V

There would be permanent damage in hardware if the device operates at the voltage over rated value.

Meanwhile, reliability could be influenced when the device has a long-term operating at maximum voltage.

Absolute maximum voltage rating:

Symbol	Description	Minimum	Typ	Unit
VDD	Module input voltage	–	3.8	V
VIN	GPIO input voltage	−	3.8	V

Power Consumption:

	Mode	Description	Average	Max
	Mode	Description	TA=25°C	TA=25°C
EMB1061 Power consumption	CPU_HALT	CPU running halted, all peripherals keep running and can wake up CPU by interrupt/event.	2.49mA	2.63mA
	Advertisement （TIMER_SLEEP ON）	Advertise every 1.28s, keep in TIMER_SLEEP mode between the advertisement intervals.	19.53uA	8.43mA
	Connected	Keep connected with other BLE device, communicate every 50ms, and keep in TIMER_SLEEP mode between the communication intervals.	138.96uA	8.39mA
	Scanning	Scan every 1.28s, and kee in TIMER_SLEEP mode between the scan intervals.	568.75uA	8.26mA
	Sleep	TIMER_SLEEP ON CPU and all peripherals OFF, internal slow RC clock and wakeup pins ON Can be waked up by internal RTC or wakeup pins（IO9/10/11/12/13）. Wake up every 10s in this test.	3.54uA	2.76mA
	Standby	CPU and all peripherals OFF Wakeup pins ON Can be waked up by wakeup pins （IO9/10/11/12/13）.	375.98nA	2.68uA

Working Environment:

Symbol	Name	Maximum	Unit
TSTG	Storage Temperature	-40 to +110	℃
TA	Operation Temperature	-40 to +105	℃
Humidity	Non-condensing, Relative humidity	95	%

Electrostatic Discharge:

Symbol	Name	Details	Level	Maximum	Unit
VESD(HBM)	Electrostatic discharge voltage (Human Body Model)	TA= +25 °C , JESD22-A114	2	2000	V
VESD(CDM)	Electrostatic discharge voltage (Charged Device Model)	TA = +25 °C , JESD22-C101	II	500	V

Part List

EMB1061 BLE Module x 1

DOCUMENTS

Datasheet
Application notes
AT firmware
BLEKit-1061 Hardware manual
Firmware Upgrade Tools
EMB1061 Firmware Programming Manual
EMB1061 ROHS Report
EMB1061 REACH Report
PCB Package

Wireless & IOT

Intel AX201 M.2 Key E CNVio2 Dual Band WiFi6 Bluetooth 5.1 802.11 AC / AX

Lightening Arrester

868mhz Spring Antenna for LoRa with IPEX Connector

868Mhz 2 dBi Gain Duck Antenna

Fiberglass Waterproof LoRa High Gain Antenna with Lightening Arrestor (868Mhz) - WPA WPC Certified

1dBi Spring Helix / Helical Coil Antenna (1 pc)

CJMCU-801 NRF8001 Bluetooth BLE 4.0 Development Board

JDY-31 BLE Bluetooth 3.0 Ultra

NRF51822 Core51822 BLE 4.0 Bluetooth

HC-05 Bluetooth Module

EMB1061 BLE Module

JCG023L LTE Antenna