Nano Polymer Adhesive Bed Prep

This is a world-class bed prep Nano Polymer Adhesive designed for use while printing high-temp polymers, but it also works great for engineering and general-purpose grades. Apply on the entire build surface or just in problem areas to cure lift.

High Performance Adhesion for High Performance Materials

There are a lot of different materials available for use in additive manufacturing today, and as a result there are a multitude of bed surfaces and adhesion products to enable consistent printing performance with any machine and material combination. For high temperature materials like PEEK and PEI on a printer like the Intamsys FunMat HT, this Nano Polymer Adhesive from Vision Miner is the best choice. Designed from the molecule up specifically for use in that workflow, poor bed adhesion will not be a problem with these high-performance materials any longer!

Easy Application and Cleanup

The Nano Polymer Adhesive is a semi-viscious liquid that can be applied easily to the required area of your build plate using the included brush. Simply apply some glue from the pen-style applicator on the bottle and spread it evenly around your print area. For high temperature materials like PEEK and PEI, it's recommended to re-apply the glue after every print for maximum adhesion. While the Nano Polymer Adhesive was designed for engineering grade materials, it's also compatible with more general use materials like PLA, ABS, and PETG.

Product attributes include

Easy to clean and reapply

Made from non-toxic organic compounds

High-temp resistant for printing PEKK, PEEK, PPSU, PSU, PPS, and Ultem™ PEI

Excellent adhesion to more common materials including PC, PC/ABS, ABS, ASA, PLA, PETG, NYLON, TPU, etc…

Adheres well to many build surfaces, including borosilicate glass, ceramic glass, PCB board, Carbon Fiber, Fiberglass, Aluminum, BuildTak™, PEI, and more.

Instructions for use

Clean build surface with water/soap, windex, alcohol

Apply adhesive evenly on build surface

Print part

Remove part – instructions below.

Part removal

Low temp materials (under 300°C): When you’re extruding below 300ºC, generally you can remove the part as soon as the plate cools. With materials like PLA or PETG, it usually pops itself off the plate. If it sticks too much, you can apply water around the base of the part, which will help it release.

Tech Tip for Using ABS on Glass: ABS contracts very quickly when it cools; because of this, the risk of chipping, chunking, or breaking glass is higher with ABS. We recommend using Kapton Tape, PEI, or some other type of protective surface on top of glass and then applying this adhesive when printing ABS.

High temp materials (over 300°C): When you’re extruding over 300ºC, remove the part as quickly as possible. You want the buildplate and part to be HOT when you remove it. We have seen many high-temp materials contract very quickly when cooling causing the glass to break in a very short period of time.

New Digital Catalog

Packed with your favorite products, detailed information, and essential technical data. Whether your brand new to 3-D printing or need to find a specific filament that best fits your project, our catalog has everything you need in one easy-to-navigate place!

Check It Out

Product Performance Comparison

Explore key attributes like tensile strength, flexural strength, glass transition, and fire testing performance. Whether you're prototyping, creating functional parts, or printing detailed models, these property graphs will help you find the perfect filament for your project.

Learn More

Package Includes

1x One bottle of Nano Polymer Adhesive - 120ML

1x Applicator brush

Magigoo | Official Page

Magigoo Coater Starter Kit

Nano Polymer Adhesive 120ml

Magigoo Pro Kit

Magigoo Pro HT - High Temperature Glue

Magigoo Original – 3d printing glue

Magigoo Pro PA - for Nylon

Magigoo Pro PC - glue for Polycarbonate

Magigoo Pro PP - glue for Polypropylene

Magigoo Pro Flex - 3d printing glue